Category: Information
-
The FCC just cracked down on linked repeaters
The FCC has always had a bit of an ambiguous term for linked repeaters, which has allowed linked over the internet like myGMRS network to cross geographical locations. In their Specifications Page it was always phrased as “over phone lines or other networks for the use of remote control” Now it’s phrased as follows: So…
-
How to make your own repeater from two handhelds
I want to preface this one with… This is a jank way of going about this. You should only use this when you absolutely need a repeater, and have spare radios, not as a permanent solution. In this example, I am using two BTECH UV-5G Plus. You can only do this with programmable radios because…
-
How to program your radio using CHIRP
Overview You can use CHIRP software to connect to your radio using a configuration cable that either came with your radio or you ordered separately. Some radios have different methods of configuration, so depending on your radio, just look up what cable it needs for programming. You use this interface cable and launch CHIRP, and…
-
How to configure your radio for the repeater
If you’re newer to GMRS or radio in general, and you don’t know how to set up custom channels, or how you can transmit on one frequency and still receive on another, then follow this guide to understand what settings you need and how you can use this for other repeaters as well. How to…